Issue 43, 2018

Chiral symmetry breaking due to impeller size in cooling crystallization of sodium chlorate

Abstract

The classic experiments of crystallisation of sodium chlorate by Kipping and Pope in 1898 showed that when NaClO3, an achiral salt, was crystallized from a tranquil solution, statistically equal numbers of levo and dextro crystals were obtained. Kondepudi et al. in 1990 extended Kipping and Pope's work and revealed that >99% of the crystals having the same handedness, i.e. total chiral symmetry breaking, were achieved when constant stirring was applied in evaporation crystallisation. In cooling crystallisation of NaClO3 at supercoolings greater than 7 °C and at a stirring rate of 300 rpm, Denk and Botsaris (1972) reported that a 50 : 50 racemic mixture of product crystals was obtained due to primary nucleation that occurred. In this paper we report, for the first time, that the size of impellers, of the same width, the same thickness, the same material of construction and operated at the same rotational speed and at the same degree of supercooling, is the exception to Denk and Botsaris's work where a stirrer of the smallest surface area led to close to 100% deracemization, while the data from the largest impeller agreed with the results of Denk and Botsaris, displaying a racemic mixture. The effects of shear, pre-seeding and surface roughness on chiral symmetry are examined to establish the likely cause of this new finding.

Graphical abstract: Chiral symmetry breaking due to impeller size in cooling crystallization of sodium chlorate

Article information

Article type
Paper
Submitted
06 Aug 2018
Accepted
31 Aug 2018
First published
01 Sep 2018

CrystEngComm, 2018,20, 6894-6899

Chiral symmetry breaking due to impeller size in cooling crystallization of sodium chlorate

X. Ni, R. Shepherd, J. Whitehead and T. Liu, CrystEngComm, 2018, 20, 6894 DOI: 10.1039/C8CE01318G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements