Jump to main content
Jump to site search

Issue 38, 2017
Previous Article Next Article

CuO/PbTiO3: A new-fangled p–n junction designed for the efficient absorption of visible light with augmented interfacial charge transfer, photoelectrochemical and photocatalytic activities

Author affiliations

Abstract

An innovative tactic is to architecture novel p–n junctions for the efficient separation of charge carriers at heterojunction interfaces and enhance the photocatalytic activity under visible light irradiation. In view of this, we have fabricated a novel CuO/PbTiO3 p–n junction by a simple impregnation method and examined its photocatalytic activity towards the degradation of malachite green. First and foremost, the photoelectrochemical measurements confirmed the n-type and p-type semiconducting properties of PbTiO3 and CuO, respectively. The measured asymmetric photocurrent in opposite directions and the rectifying behaviour of all the prepared heterojunctions confirmed the formation of a p–n junction between the CuO and PbTiO3. The TEM results reveal that the p-type CuO nanoparticles were successfully assembled on the surface of the polyhedron-shaped n-type PbTiO3 and a strong p–n junction interface was formed between them. A regular study is represented for the detailed characterization of the phases, surface chemical composition, surface morphology, and optical properties of the prepared heterojunctions. All the CuO/PbTiO3 p–n junctions exhibited superior photocatalytic activity for the degradation of malachite green (MG) under visible light irradiation compared to neat PbTiO3 and CuO. The superior photocatalytic activity of the p–n junction samples was due to the efficient separation of charge carriers at the junction interface. The efficient separation of charge carriers at the p–n junction interface was confirmed by EIS, steady state, and time-resolved PL analysis. The 33% CuO/PbTiO3 p–n junction reveals a higher activity around 91% degradation of malachite green under visible light irradiation in comparison to the other p–n junctions. The kinetic analysis of the prepared photocatalysts for malachite green (MG) degradation showed that the process followed a pseudo-first-order kinetics model.

Graphical abstract: CuO/PbTiO3: A new-fangled p–n junction designed for the efficient absorption of visible light with augmented interfacial charge transfer, photoelectrochemical and photocatalytic activities

Back to tab navigation

Supplementary files

Publication details

The article was received on 15 Jun 2017, accepted on 01 Sep 2017 and first published on 19 Sep 2017


Article type: Paper
DOI: 10.1039/C7TA05206E
Citation: J. Mater. Chem. A, 2017,5, 20359-20373

  •   Request permissions

    CuO/PbTiO3: A new-fangled p–n junction designed for the efficient absorption of visible light with augmented interfacial charge transfer, photoelectrochemical and photocatalytic activities

    K. H. Reddy, K. Parida and P. K. Satapathy, J. Mater. Chem. A, 2017, 5, 20359
    DOI: 10.1039/C7TA05206E

Search articles by author

Spotlight

Advertisements