Issue 87, 2017, Issue in Progress

Fabrication and evaluation of Rb2Co(H2P2O7)2·2H2O/waterborne polyurethane nanocomposite coating for corrosion protection aspects

Abstract

Here we investigate the influence of new acidic pyrophosphate (Rb2Co(H2P2O7)2·2H2O) (DP) incorporation in waterborne polyurethane (WBPU) coatings on the corrosion protection efficiency of WBPU coatings for carbon steel in 3.5% NaCl solution. We used potentiodynamic polarization, electrochemical frequency modulation (EFM) and pull-off adhesion and O2 gas permeability measurements to measure the corrosion protection efficiency of the WBPU coating. The dispersion of the DP nano-particles into the WBPU matrix was characterized via TEM observations. We find that the corrosion resistance and mechanical properties of the WBPU coating increase with incorporation of DP nano-particles into the WBPU coating.

Graphical abstract: Fabrication and evaluation of Rb2Co(H2P2O7)2·2H2O/waterborne polyurethane nanocomposite coating for corrosion protection aspects

Article information

Article type
Paper
Submitted
11 Oct 2017
Accepted
27 Nov 2017
First published
04 Dec 2017
This article is Open Access
Creative Commons BY license

RSC Adv., 2017,7, 55074-55080

Fabrication and evaluation of Rb2Co(H2P2O7)2·2H2O/waterborne polyurethane nanocomposite coating for corrosion protection aspects

M. A. Deyab, R. Essehli, B. El Bali and M. Lachkar, RSC Adv., 2017, 7, 55074 DOI: 10.1039/C7RA11212B

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements