Issue 43, 2017

Microwave absorption properties of carbon fiber radar absorbing coatings prepared by water-based technologies

Abstract

Carbon fiber radar absorbing coatings (CFRACs), composed of different amounts of carbon fiber (CF) embedded in polyurethane resin, were prepared using water-based technologies. The microstructures and properties of the coatings were characterized by means of scanning electron microscopy, differential scanning calorimetry, Fourier infrared spectrometry, X-ray diffraction analysis, and vector network analysis. Our results show that with an increase in CF content and thickness of coating, the peak reflection of the CFRAC moved in the low frequency direction. When the CF content was 0.8 wt% and the thickness of the coating was 1.2 mm, the maximum reflection losses of the coatings were −11.01 dB over the frequency range of 8–18 GHz, with a less than −10 dB (over 90% microwave absorption) bandwidth of nearly 4.2 GHz and a coating density of 1.02 kg m−2. The results indicated that CFRACs could be a potential microwave absorbing material used over the frequency range of 8–18 GHz.

Graphical abstract: Microwave absorption properties of carbon fiber radar absorbing coatings prepared by water-based technologies

Article information

Article type
Paper
Submitted
03 Mar 2017
Accepted
04 May 2017
First published
18 May 2017
This article is Open Access
Creative Commons BY license

RSC Adv., 2017,7, 26658-26664

Microwave absorption properties of carbon fiber radar absorbing coatings prepared by water-based technologies

G. Ban, Z. Liu, S. Ye, H. Yang, R. Tao and P. Luo, RSC Adv., 2017, 7, 26658 DOI: 10.1039/C7RA02631E

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements