Issue 14, 2017, Issue in Progress

ALD preparation of high-k HfO2 thin films with enhanced energy density and efficient electrostatic energy storage

Abstract

High-k dielectric HfO2 thin films with a predominant monoclinic phase were prepared by atomic layer deposition (ALD). The annealed HfO2 films exhibited a large dielectric constant, of up to εr = 26 with a high breakdown field of over 4000 kV cm−1. The best performance with a maximum recoverable energy density of 21.3 J cm−3 and energy efficiency of 75% was obtained with the 63 nm HfO2 films. In addition, a well-defined temperature dependence of the energy storage properties from room temperature to 150 °C was demonstrated, indicating a stable energy density variation between 11.0 and 13.0 J cm−3 with a high energy efficiency of about 80%. These achievements provide a platform for synthesizing high-k dielectric thin films with enhanced energy densities and efficiencies.

Graphical abstract: ALD preparation of high-k HfO2 thin films with enhanced energy density and efficient electrostatic energy storage

Supplementary files

Article information

Article type
Paper
Submitted
06 Dec 2016
Accepted
28 Dec 2016
First published
26 Jan 2017
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2017,7, 8388-8393

ALD preparation of high-k HfO2 thin films with enhanced energy density and efficient electrostatic energy storage

L. Zhang, M. Liu, W. Ren, Z. Zhou, G. Dong, Y. Zhang, B. Peng, X. Hao, C. Wang, Z. Jiang, W. Jing and Z. Ye, RSC Adv., 2017, 7, 8388 DOI: 10.1039/C6RA27847G

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements