Issue 44, 2017

Fluoride substitution in LiBH4; destabilization and decomposition

Abstract

Fluoride substitution in LiBH4 is studied by investigation of LiBH4–LiBF4 mixtures (9 : 1 and 3 : 1). Decomposition was followed by in situ synchrotron radiation X-ray diffraction (in situ SR-PXD), thermogravimetric analysis and differential scanning calorimetry with gas analysis (TGA/DSC-MS) and in situ infrared spectroscopy (in situ FTIR). Upon heating, fluoride substituted LiBH4 forms (LiBH4−xFx) and decomposition occurs, releasing diborane and solid decomposition products. The decomposition temperature is reduced more than fourfold relative to the individual constituents, with decomposition commencing at T = 80 °C. The degree of fluoride substitution is quantified by sequential Rietveld refinement and shows a selective manner of substitution. In situ FTIR experiments reveal formation of bands originating from LiBH4−xFx. Formation of LiF and observation of diborane release implies that the decomposing materials have a composition that facilitates formation of diborane and LiF, i.e. LiBH4−xFx (LiBH3F). An alternative approach for fluoride substitution was performed, by addition of Et3N·3HF to LiBH4, yielding extremely unstable products. Spontaneous decomposition indicates fluoride substitution to have occurred. From our point of view, this is the most significant destabilization effect seen for borohydride materials so far.

Graphical abstract: Fluoride substitution in LiBH4; destabilization and decomposition

Supplementary files

Article information

Article type
Paper
Submitted
15 Aug 2017
Accepted
16 Oct 2017
First published
16 Oct 2017

Phys. Chem. Chem. Phys., 2017,19, 30157-30165

Fluoride substitution in LiBH4; destabilization and decomposition

B. Richter, D. B. Ravnsbæk, M. Sharma, A. Spyratou, H. Hagemann and T. R. Jensen, Phys. Chem. Chem. Phys., 2017, 19, 30157 DOI: 10.1039/C7CP05565J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements