Bioinspired fabrication of optical fiber SPR sensors for immunoassays using polydopamine-accelerated electroless plating

Abstract

This study presents a facile, rapid and effective method for the fabrication of optical fiber surface plasmon resonance (SPR) sensors via polydopamine (PDA)-accelerated electroless plating (ELP). The bioinspired PDA coating formed through the facile self-polymerization of dopamine (DA) was utilized as a versatile material for optic-fiber functionalization. Gold seeds were then rapidly and firmly adsorbed onto the PDA functional layer by amino and imino intermediates generated during the polymerization, and a gold film sensor was fabricated after metal deposition. The fabrication time of the sensor was decreased by 6–12 times, and the fabricated sensor exhibited higher sensitivity, better reproducibility and adhesion stability compared with those fabricated by the traditional ELP. Some key experimental parameters, including DA polymerization temperature, DA polymerization time, and plating time, were investigated in detail. The optimized sample exhibited high sensitivity ranging from 1391 nm per RIU to 5346 nm per RIU in the refractive index range of 1.328 to 1.386. Scanning electron microscopy images indicated that the sensor surface consisted of gold nanoparticles with a uniform particle size and an orderly arrangement, and the film thickness was approximately 60 nm. Another PDA layer was formed on the gold film for facile immobilization of antibodies. The sensor exhibited effective antibody immobilization ability and high sensitivity for human IgG detection over a wide range of concentrations from 0.5 to 40 μg mL⁻¹, which indicate the potential applications of the fabricated sensor in immunoassays.