Issue 96, 2016

[Ir(ppy)2pyim]PF6 dielectric mixed with PMMA for area emission transistors

Abstract

We demonstrated an area emission transistor with [Ir(ppy)2pyim]PF6/PMMA as the dielectric layer. The brightness can be tuned by VDS and VGS, respectively. The device performance was optimized by adjusting the mass concentration ratios of PMMA. Different working mechanisms of the devices with and without PMMA were investigated through the Kelvin probe force microscope. The doping of PMMA will change the surface potential of [Ir(ppy)2pyim]PF6, and then change the properties of charge injection. Our research may open up a new way for the development of multifunctional devices.

Graphical abstract: [Ir(ppy)2pyim]PF6 dielectric mixed with PMMA for area emission transistors

Supplementary files

Article information

Article type
Communication
Submitted
02 Sep 2016
Accepted
27 Sep 2016
First published
27 Sep 2016

RSC Adv., 2016,6, 94010-94013

[Ir(ppy)2pyim]PF6 dielectric mixed with PMMA for area emission transistors

J. Li, W. Li, D. Ma, W. Zhang, L. He, L. Duan, L. Wang and G. Dong, RSC Adv., 2016, 6, 94010 DOI: 10.1039/C6RA22052E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements