Issue 85, 2016, Issue in Progress

In situ synchrotron small- and wide-angle X-ray study on the structural evolution of Kevlar fiber under uniaxial stretching

Abstract

The structural evolution and mechanism of Kevlar 29 and Kevlar 129 (poly(p-phenylene terephthalamide)) fibers during stretching were studied by in situ synchrotron small-angle X-ray scattering (SAXS) and wide-angle X-ray scattering (WAXS). Compared with Kevlar 29, the tensile strength of Kevlar 129 increased, while the elongation-to-break ratio decreased. SAXS results showed that ordered lamellae were observed only in Kevlar 29. The fibril length of Kevlar 129 was larger than that of Kevlar 29; however, the fibril misorientation width of Kevlar 129 was smaller. During stretching, both the fibril length and fibril misorientation width decreased at low strains, and then increased until the fibrils broke both in Kevlar 29 and Kevlar 129 fibers. From WAXS results, the crystal orientation angle decreased in Kevlar 29 during stretching, while that in Kevlar 129 increased at low strains and then decreased until the fibers broke. The change of crystallinity indicated that the amorphous phase can convert to the crystal phase at high strains, although the conversion ratio was not large. By combining the SAXS and WAXS results, a potential mechanism for Kevlar fibers during stretching was proposed.

Graphical abstract: In situ synchrotron small- and wide-angle X-ray study on the structural evolution of Kevlar fiber under uniaxial stretching

Article information

Article type
Paper
Submitted
11 Jul 2016
Accepted
12 Aug 2016
First published
12 Aug 2016

RSC Adv., 2016,6, 81552-81558

In situ synchrotron small- and wide-angle X-ray study on the structural evolution of Kevlar fiber under uniaxial stretching

X. Li, F. Tian, P. Zhou, C. Yang, X. Li, F. Bian and J. Wang, RSC Adv., 2016, 6, 81552 DOI: 10.1039/C6RA17671B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements