Issue 56, 2016
From the journal:

RSC Advances

Novel photo-curable polyurethane resin for stereolithography†

Le Hoang Sinh,‡ab   Korhonen Harri,‡a   Liikanen Marjo,a   Malin Minna,a   Nguyen Dang Luong,a   Weisser Jürgen,c   Walter Torsten,c   Schnabelrauch Matthiasc  and  Seppälä Jukka*a  

* Corresponding authors

a Laboratory of Polymer Technology, Department of Biotechnology and Chemical Technology, Aalto University, School of Chemical Technology, P. O. Box 16100, FI-00076 Aalto, Finland
E-mail: jukka.seppala@aalto.fi

b Center for Advanced Chemistry, Institute of Research and Development, Duy Tan University, Da Nang, Vietnam

c Innovent e.V., Biomaterials Department, Jena, Germany

Abstract

A novel photo-curable polyurethane resin for stereolithography has been demonstrated herein. The resin was printed by stereolithography to form 3-dimensional elastomeric objects without need of any diluent. The resultant elastomer exhibited good mechanical strength, high elasticity, and excellent cell adhesion and proliferation.

Graphical abstract: Novel photo-curable polyurethane resin for stereolithography

About
Cited by
Related
Download options Please wait...

Supplementary files

Article information

DOI
https://doi.org/10.1039/C6RA05045J
Article type
Communication
Submitted
25 Feb 2016
Accepted
18 May 2016
First published
19 May 2016
This article is Open Access
Creative Commons BY license

RSC Adv., 2016,6, 50706-50709

Permissions

Request permissions

Novel photo-curable polyurethane resin for stereolithography

L. H. Sinh, K. Harri, L. Marjo, M. Minna, N. D. Luong, W. Jürgen, W. Torsten, S. Matthias and S. Jukka, RSC Adv., 2016, 6, 50706 DOI: 10.1039/C6RA05045J

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements