Issue 52, 2016

Low temperature catalytic combustion of o-dichlorobenzene over supported Mn–Ce oxides: effect of support and Mn/Ce ratio

Abstract

A series of Mn–Ce mixed oxide catalysts supported on cordierite, TiO2 or γ-Al2O3 carriers were tested for their catalytic performance towards hazardous gaseous o-dichlorobenzene combustion. The results indicated that superficial MnOx species vary with carriers such as Mn2O3 on the cordierite, Mn3O4 on the TiO2 and amorphous MnOx on the Al2O3 support. The catalysts supported on cordierite with a 9 : 1 Mn/Ce the ratio presented high catalytic performance in a low temperature range of 150–300 °C, which is due to their better reducibility, well-dispersed manganese oxide and enrichment of available active oxygen species on the catalysts surface.

Graphical abstract: Low temperature catalytic combustion of o-dichlorobenzene over supported Mn–Ce oxides: effect of support and Mn/Ce ratio

Article information

Article type
Paper
Submitted
25 Jan 2016
Accepted
26 Apr 2016
First published
27 Apr 2016

RSC Adv., 2016,6, 46822-46827

Low temperature catalytic combustion of o-dichlorobenzene over supported Mn–Ce oxides: effect of support and Mn/Ce ratio

Y. Ren, A. Tang, L. Hu and H. Xiang, RSC Adv., 2016, 6, 46822 DOI: 10.1039/C6RA02256A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements