Issue 7, 2016

Boundary lubricating properties of hydrophobically modified polyacrylamide

Abstract

Boundary lubrication has been studied in many associative bio-systems, including synovial fluids, phosphatidylcholine vesicles and mucus. However, comprehensive tribological investigations on synthetic associative polymers have not received sufficient attention. In this paper, we investigated the frictional behavior of polydimethylsiloxane (PDMS) rubber substrates lubricated with a universal and typical synthetic hydrophobically modified polyacrylamide (PAM) aqueous solution. Boundary lubrication was only observed at high concentrations above which intermolecular association was strong while adsorption mass and conformation were constant. Direct dilution with excessive water and replacement of concentrated solution with water both gave the PDMS the same boundary friction coefficient as that of lubrication only with water. Addition of surfactant that could disrupt the interchain association evidently destroyed the boundary lubrication of the hydrophobically modified PAM aqueous solution. Results revealed that interchain association, rather than the robust adsorption layer, plays a significant role in boundary lubrication of compliant PDMS–PDMS contact. This finding may provide new insight into the understanding of the boundary lubrication mechanism and developing novel boundary lubricants for artificial cartilage or consumer industry.

Graphical abstract: Boundary lubricating properties of hydrophobically modified polyacrylamide

Article information

Article type
Paper
Submitted
23 Nov 2015
Accepted
03 Jan 2016
First published
07 Jan 2016

RSC Adv., 2016,6, 5695-5702

Boundary lubricating properties of hydrophobically modified polyacrylamide

H. Su, X. Wang, M. Du, Y. Song and Q. Zheng, RSC Adv., 2016, 6, 5695 DOI: 10.1039/C5RA24777B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements