Issue 4, 2016

Pressure induced structural transition of small carbon nano-onions

Abstract

Small carbon nano-onions (S-CNOs) were prepared by annealing nanodiamonds (ND) in an argon atmosphere. The structure and morphology of S-CNOs were determined by X-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM) and the average grain size of the S-CNOs was about 8 nm. In situ high pressure Raman spectra of S-CNOs were investigated by diamond anvil cell experiments at pressures up to 22.5 GPa. A reversible structural transition occurred at about 7.4 GPa, resulting from the polygonization of S-CNOs. The structural transition pressure of S-CNOs is lower than that of large CNOs (L-CNOs) and onion-like carbon (OLC) nanospheres. S-CNOs derived from the annealing of ND have a high defect density, a large number of sp3 bonds and high free energy. In addition, high pressure can be generated in the interior of S-CNOs at high temperatures. The results indicated that nanotwinned diamond (nt-diamond) may be prepared using S-CNOs derived from the annealing of NDs as a raw material below 10 GPa, which is much lower than the pressure needed for synthesizing nano-polycrystalline diamond (NPD) and nt-diamond with other carbon resources (usually more than 15 GPa).

Graphical abstract: Pressure induced structural transition of small carbon nano-onions

Article information

Article type
Paper
Submitted
21 Nov 2015
Accepted
12 Dec 2015
First published
15 Dec 2015

RSC Adv., 2016,6, 2914-2919

Pressure induced structural transition of small carbon nano-onions

Y. Zheng, Y. Ma, Q. Tao, Y. Li, S. Ma, T. Cui, X. Wang, S. Dong and P. Zhu, RSC Adv., 2016, 6, 2914 DOI: 10.1039/C5RA24720A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements