Issue 3, 2016

Utility of solid phase extraction for UV-visible spectrophotometric determination of gallium in environmental and biological samples

Abstract

A sensitive, selective and rapid method for the determination of gallium based on the sensitive reaction of Ga(III) with 1-(2-benzothiazolylazo)-2-hydroxy-3-naphthoic acid (BTAHN) and the solid phase extraction of the BTAHN–Ga(III) complex on a column of Amberlite XAD-4 resin was developed. In the presence of 2.0 mol L−1 of nitric acid solution and cetylpyridinium chloride (CPC) medium, BTAHN reacts with gallium(III) to form a deep red complex with a molar ratio of 2 : 1 {BTAHN to Ga(III)}. The complex was enriched by solid phase extraction with an Amberlite XAD-4 resin. An enrichment factor of 500 was obtained by elution of the complex from the column with a minimal amount of dimethylformamide (DMF). The molar absorptivity of the complex in DMF medium was 5.57 × 107 L mol−1 cm−1 at 599 nm. Beer's law was obeyed in the range of 0.01–0.70 μg mL−1. The relative standard deviation for eleven replicate samples at the 0.50 μg mL−1 level was 0.95%. The attained detection and quantification limits amounted to 3.1 and 10.2 ng mL−1, respectively. This method was applied to the determination of gallium in environmental water and biological samples with good results.

Graphical abstract: Utility of solid phase extraction for UV-visible spectrophotometric determination of gallium in environmental and biological samples

Article information

Article type
Paper
Submitted
19 Oct 2015
Accepted
17 Dec 2015
First published
21 Dec 2015

RSC Adv., 2016,6, 1938-1944

Author version available

Utility of solid phase extraction for UV-visible spectrophotometric determination of gallium in environmental and biological samples

A. S. Amin and S. M. N. Moalla, RSC Adv., 2016, 6, 1938 DOI: 10.1039/C5RA21368A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements