Issue 17, 2016

Tungsten carbide/porous carbon core–shell nanocomposites as a catalyst support for methanol oxidation

Abstract

Carbon-encapsulated tungsten carbide (WC@C) was prepared by a microwave-assisted synthesis method with resorcinol-formaldehyde resin (RF) as carbon source. WC was encapsulated by porous carbon layer to form core–shell structure which could protect tungsten oxide from occupying the active sites on the surfaces of the WC@C. The characteristics of WC@C composites were determined by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy and Brunauer–Emmet–Teller gas adsorption. Platinum nanoparticles were uniformly distributed on WC@C to synthesize a new electrocatalyst Pt–WC@C. The electro-catalytic performances of prepared Pt–WC@C, commercial Pt/C and PtRu/C toward methanol oxidation were compared by cyclic voltammetry, chronoamperometry and CO stripping test. It was found that Pt–WC@C exhibited higher catalytic activity for methanol oxidation than that of commercial Pt/C and PtRu/C catalysts. Especially, the Pt–WC@C achieved the long-term stability which was attributed to the effective protection by the carbon porous shell structure.

Graphical abstract: Tungsten carbide/porous carbon core–shell nanocomposites as a catalyst support for methanol oxidation

Article information

Article type
Paper
Submitted
14 Sep 2015
Accepted
26 Jan 2016
First published
28 Jan 2016

RSC Adv., 2016,6, 13873-13880

Tungsten carbide/porous carbon core–shell nanocomposites as a catalyst support for methanol oxidation

X. Lang, M. Shi, Y. Jiang, H. Chen and C. Ma, RSC Adv., 2016, 6, 13873 DOI: 10.1039/C5RA18817B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements