Issue 16, 2016

Thermal stability of photoluminescence in Cu-doped Zn–In–S quantum dots for light-emitting diodes

Abstract

The photoluminescence (PL) properties of the Cu:Zn–In–S core quantum dots (QDs) and core–shell QDs were systematically investigated by using steady-state and time-resolved PL spectra at temperatures ranging from 80 to 400 K. The effects of the shell structure and the host bandgap on the thermal stability of Cu dopant emissions were studied by measuring the change in the PL intensity and the lifetime. It was found that the PL intensities and lifetimes of the core and core/shell QDs with green, yellow, and red emissions almost decrease with increasing temperatures while their PL was quenched at 300 K and 400 K, respectively, indicating the shell-enhanced thermal stability of the PL. The emission wavelength of the QDs as a function of temperature was also provided. The mechanisms of Cu dopant emission and thermal quenching were discussed. Finally, the green, yellow, red, and white light emitting light emitting diodes (LEDs) were fabricated based on Cu:Zn–In–S QDs.

Graphical abstract: Thermal stability of photoluminescence in Cu-doped Zn–In–S quantum dots for light-emitting diodes

Supplementary files

Article information

Article type
Paper
Submitted
13 Jan 2016
Accepted
21 Mar 2016
First published
21 Mar 2016

Phys. Chem. Chem. Phys., 2016,18, 10976-10982

Thermal stability of photoluminescence in Cu-doped Zn–In–S quantum dots for light-emitting diodes

X. Yuan, R. Ma, J. Hua, Y. Liu, J. Li, W. Zhang, J. Zhao and H. Li, Phys. Chem. Chem. Phys., 2016, 18, 10976 DOI: 10.1039/C6CP00240D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements