Issue 35, 2016

Rapid analysis of trace drugs and metabolites using a thermal desorption DART-MS configuration

Abstract

The need to analyze trace narcotic samples rapidly for screening or confirmatory purposes is of increasing interest to the forensic, homeland security, and criminal justice sectors. This work presents a novel method for the detection and quantification of trace drugs and metabolites off of a swipe material using a thermal desorption direct analysis in real time mass spectrometry (TD-DART-MS) configuration. A variation on traditional DART, this configuration allows for desorption of the sample into a confined tube, completely independent of the DART source, allowing for more efficient and thermally precise analysis of material present on a swipe. Over thirty trace samples of narcotics, metabolites, and cutting agents deposited onto swipes were rapidly differentiated using this methodology. The non-optimized method led to sensitivities ranging from single nanograms to hundreds of picograms. Direct comparison to traditional DART with a subset of the samples highlighted an improvement in sensitivity by a factor of twenty to thirty and an increase in reproducibility, measuring integrated area of the base peak, sample to sample from approximately 45% RSD to less than 15% RSD. Rapid extraction-less quantification was also possible.

Graphical abstract: Rapid analysis of trace drugs and metabolites using a thermal desorption DART-MS configuration

Article information

Article type
Communication
Submitted
29 Jun 2016
Accepted
13 Aug 2016
First published
16 Aug 2016

Anal. Methods, 2016,8, 6494-6499

Author version available

Rapid analysis of trace drugs and metabolites using a thermal desorption DART-MS configuration

E. Sisco, T. P. Forbes, M. E. Staymates and G. Gillen, Anal. Methods, 2016, 8, 6494 DOI: 10.1039/C6AY01851C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements