Issue 4, 2016

Multiplex microfluidic system integrating sequential operations of microalgal lipid production

Abstract

The unit cost for the production of algal biofuel needs to be reduced in order to be a substitute for fossil fuel. To achieve this goal, the development of a novel system is needed for a rapid screening of numerous microalgal species to isolate superior strains with the highest lipid productivity. Here, we developed a PDMS-based multiplex microfluidic system with eight chambers and micropillar arrays to expedite multiple steps for lipid sample preparation from different microalgal strains. We could rapidly and efficiently perform sequential operations from cell culture to lipid extraction of eight different microalgal strains simultaneously on a single device without harvesting and purification steps, which are labor- and energy-intensive, by the simple injection of medium and solvent into the central inlet due to the integrated micropillar arrays connecting the chambers and central inlet. The lipid extraction efficiency using this system was comparable (94.5–102.6%) to the conventional Bligh–Dyer method. We investigated the cell growth and lipid productivity of different strains using the microfluidic device. We observed that each strain has a different lipid accumulation pattern according to stress conditions. These results demonstrate that our multiplex microfluidic approach can provide an efficient analytical tool for the rapid analysis of strain performances (e.g. cell growth and lipid productivities) and the determination of the optimal lipid induction condition for each strain.

Graphical abstract: Multiplex microfluidic system integrating sequential operations of microalgal lipid production

Article information

Article type
Communication
Submitted
21 Nov 2015
Accepted
11 Jan 2016
First published
19 Jan 2016

Analyst, 2016,141, 1218-1225

Multiplex microfluidic system integrating sequential operations of microalgal lipid production

H. S. Kwak, J. Y. H. Kim, S. C. Na, N. L. Jeon and S. J. Sim, Analyst, 2016, 141, 1218 DOI: 10.1039/C5AN02409A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements