Issue 19, 2015

Effects of spontaneous nitrogen incorporation by a 4H-SiC(0001) surface caused by plasma nitridation

Abstract

Change in defect states in the nitrided 4H-SiC(0001) channel formed by a plasma nitridation (PN) process was investigated as a function of rapid processing time (180 s) at room temperature. The electronic structure of the interface between the nitride layer and the SiC substrate was investigated using X-ray photoelectron spectroscopy (XPS), medium-energy ion scattering (MEIS) and first-principles DFT calculations. The findings clearly showed that N adsorption occurred through the spontaneous incorporation at the SiC subsurface, resulting in the formation of an N-laminated structure at the interface. The results are consistent with an enhancement in the interface electrical characteristics because the energetically most stable gap state of SiC could only be observed in the N-laminate structure. In particular, the stress induced leakage current (SILC) characteristics showed that the generation of the defect state was significantly suppressed in a metal oxide semiconductor (MOS) structure with a nitride layer. These results provide an in-depth understanding of the process involved in the incorporation of N into the SiC subsurface and for the enhanced electrical characteristics of the interfacial nitride layer on SiC in the PN system.

Graphical abstract: Effects of spontaneous nitrogen incorporation by a 4H-SiC(0001) surface caused by plasma nitridation

Supplementary files

Article information

Article type
Paper
Submitted
09 Jan 2015
Accepted
16 Apr 2015
First published
20 Apr 2015

J. Mater. Chem. C, 2015,3, 5078-5088

Effects of spontaneous nitrogen incorporation by a 4H-SiC(0001) surface caused by plasma nitridation

D. Kim, Y. Kang, K. Jeong, H. Kang, S. W. Cho, K. Chung, H. Kim and M. Cho, J. Mater. Chem. C, 2015, 3, 5078 DOI: 10.1039/C5TC00076A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements