Issue 21, 2015

Rational design and in situ fabrication of MnO2@NiCo2O4 nanowire arrays on Ni foam as high-performance monolith de-NOx catalysts

Abstract

In this work, we have rationally designed and originally developed a novel monolith de-NOx catalyst with nickel foam as the carrier and three dimensional hierarchical MnO2@NiCo2O4 core–shell nanowire arrays in situ grown on the surface via a two-step hydrothermal process with a post calcination treatment. The catalysts were systematically examined by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, elemental mapping, ion sputtering thinning, X-ray photoelectron spectroscopy, inductively coupled plasma atomic emission spectroscopy, H2 temperature-programmed reduction, NH3/NO + O2 temperature-programmed desorption measurements and catalytic performance tests. The results indicate that the nanowire is composed of hollow NiCo2O4 spinel as the core and MnO2 nanoparticles as the shell layer. By ingeniously making the hierarchical Ni–Co oxide nanowires as the support for manganese oxides, the MnO2@NiCo2O4@Ni foam catalyst not only takes advantage of the high surface area of Ni–Co nanowires to achieve high loading amounts as well as high dispersion of manganese oxides, but also makes use of the synergistic catalytic effect between Ni, Co and Mn multiple oxides, and exhibits excellent low-temperature catalytic performance in the end. In addition, with the structure and morphology well maintained under long term steady isothermal operation, the catalyst is able to sustain high NO conversion and exhibits superior catalytic cycle stability and good H2O resistance. Considering all these favorable properties, the MnO2@NiCo2O4@Ni foam catalyst could serve as a promising candidate for the monolith de-NOx catalyst at low temperatures and the rational design of in situ synthesis of 3D hierarchical monolith catalysts also puts forward a new way for the development of environmental-friendly and highly active monolith de-NOx catalysts.

Graphical abstract: Rational design and in situ fabrication of MnO2@NiCo2O4 nanowire arrays on Ni foam as high-performance monolith de-NOx catalysts

Supplementary files

Article information

Article type
Paper
Submitted
13 Feb 2015
Accepted
16 Apr 2015
First published
17 Apr 2015

J. Mater. Chem. A, 2015,3, 11543-11553

Author version available

Rational design and in situ fabrication of MnO2@NiCo2O4 nanowire arrays on Ni foam as high-performance monolith de-NOx catalysts

Y. Liu, J. Xu, H. Li, S. Cai, H. Hu, C. Fang, L. Shi and D. Zhang, J. Mater. Chem. A, 2015, 3, 11543 DOI: 10.1039/C5TA01212K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements