Issue 117, 2015

c-Si solar cells and Si n-MOSFETs prepared by ICP assisted hot wire implantation doping

Abstract

In this work, ICP-assisted hot wire implantation doping was carried out to fabricate c-Si solar cells. The obtained junction depth obtained was around 70 nm and the carrier concentration of the phosphorus was approximately 9.34 × 1020 cm−3. The efficiency of the fabricated SiNx/textured c-Si photovoltaic device was 16.08%. ICP-assisted hot wire implantation doping was also utilized to prepare Si n-MOSFETs. Experimental results indicate that the sub-threshold slope and on-off current ratio of the Si n-MOSFETs were about 0.39 V decade−1 and over 104, respectively.

Graphical abstract: c-Si solar cells and Si n-MOSFETs prepared by ICP assisted hot wire implantation doping

Article information

Article type
Paper
Submitted
27 Aug 2015
Accepted
03 Nov 2015
First published
06 Nov 2015

RSC Adv., 2015,5, 96547-96550

c-Si solar cells and Si n-MOSFETs prepared by ICP assisted hot wire implantation doping

Y. Chen, S. Chang, C. Hsu, Y. Wu and T. Hsueh, RSC Adv., 2015, 5, 96547 DOI: 10.1039/C5RA17403A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements