Issue 106, 2015

A label-free electrochemical immunosensor for carcinoembryonic antigen detection on a graphene platform doped with poly(3,4-ethylenedioxythiophene)/Au nanoparticles

Abstract

In this work, a two-step method was developed for the fabrication of a graphene sensing platform doped with poly(3,4-ethylenedioxythiophene)/Au nanoparticles (AuNPs/PEDOT/GR). PEDOT nanorods grown on graphene oxide nanosheets (PEDOT/GO) were firstly synthesized by liquid–liquid interfacial polymerization, followed by the chemical reduction of HAuCl4 by NaBH4. During the reduction process, GO doped in the PEDOT was also reduced to a more conductive form of GR. The obtained AuNPs/PEDOT/GR showed excellent conductivity and large surface area. Thus, a simple and sensitive label-free immunosensor based on AuNPs/PEDOT/GR nanocomposite has been proposed to detect carcinoembryonic antigen (CEA) by measuring the change of electrochemical response before and after the immunoreaction. Under the optimized conditions, the linear range of the proposed immunosensor is estimated to be from 0.0004 to 40 ng mL−1 (R2 = 0.9969) and the detection limit is estimated to be 0.1 pg mL−1 at a signal-to-noise ratio of 3. Moreover, the immunosensor was examined for use in the determination of CEA in real human serum samples with satisfactory results.

Graphical abstract: A label-free electrochemical immunosensor for carcinoembryonic antigen detection on a graphene platform doped with poly(3,4-ethylenedioxythiophene)/Au nanoparticles

Article information

Article type
Paper
Submitted
18 Aug 2015
Accepted
07 Oct 2015
First published
07 Oct 2015

RSC Adv., 2015,5, 86910-86918

Author version available

A label-free electrochemical immunosensor for carcinoembryonic antigen detection on a graphene platform doped with poly(3,4-ethylenedioxythiophene)/Au nanoparticles

Y. Gao, J. Xu, L. Lu, X. Zhu, W. Wang, T. Yang, K. Zhang and Y. Yu, RSC Adv., 2015, 5, 86910 DOI: 10.1039/C5RA16618G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements