Issue 56, 2015

Highly activated Ag-doped Fe-based catalysts designed for Fischer–Tropsch synthesis

Abstract

Ag-doped Fe-based microspheres were synthesized via a one-pot solvothermal method, and displayed excellent mechanical stability and catalytic activity. Especially, the catalyst at Ag/Fe = 1 showed the lowest selectivity to CH4 (12.6 wt%) and the highest to C2–4 olefins (29.0 wt%), as well as a good selectivity to gasoline-range (C5–11) fraction products (45.7 wt%). In addition, the catalytic activity and product selectivity of Ag/Fe measured at 280 °C was superior to that at 270 °C and 260 °C.

Graphical abstract: Highly activated Ag-doped Fe-based catalysts designed for Fischer–Tropsch synthesis

Supplementary files

Article information

Article type
Paper
Submitted
08 Apr 2015
Accepted
14 May 2015
First published
14 May 2015

RSC Adv., 2015,5, 45426-45430

Highly activated Ag-doped Fe-based catalysts designed for Fischer–Tropsch synthesis

Y. Zhang, L. Ma, T. Wang and X. Li, RSC Adv., 2015, 5, 45426 DOI: 10.1039/C5RA08444J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements