Issue 65, 2015

NOx storage and soot combustion over well-dispersed mesoporous mixed oxides via hydrotalcite-like precursors

Abstract

A series of mixed oxides with highly dispersed redox components were prepared via hydrotalcite-like precursors in which Mg was partly substituted with copper and cobalt, which were employed for NOx storage and soot combustion. The physico-chemical properties of the catalysts were characterized by XRD, TGA, IR, N2 adsorption, H2-TPR and in situ FTIR techniques. The results show the transition metal cations have isomorphously replaced Mg2+ in the layered structures forming a single hydrotalcite type phase. After calcination, the transition metal oxides exist in a highly dispersed form in the Mg(Al)O matrix and there is a cooperative effect between the copper and cobalt on the redox properties of the catalyst. The as-prepared oxide catalysts exhibit large surface areas, basic characters and improved redox properties, resulting in high performances in NOx storage and soot combustion. Both the NOx storage and desorption are catalytically accelerated due to the highly dispersed transition metal oxides. The presence of NOx positively affects the activity of all the oxides catalysts for soot combustion, which may be related to the production of NO2 during NO oxidation. NO2-assisted mechanism and active oxygen mechanism may occur simultaneously in soot/NO/O2 reaction.

Graphical abstract: NOx storage and soot combustion over well-dispersed mesoporous mixed oxides via hydrotalcite-like precursors

Article information

Article type
Paper
Submitted
23 Apr 2015
Accepted
09 Jun 2015
First published
09 Jun 2015

RSC Adv., 2015,5, 52743-52753

Author version available

NOx storage and soot combustion over well-dispersed mesoporous mixed oxides via hydrotalcite-like precursors

Z. Wang, P. Lu, X. Zhang, L. Wang, Q. Li and Z. Zhang, RSC Adv., 2015, 5, 52743 DOI: 10.1039/C5RA07414B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements