Issue 41, 2015

The origin of a large apparent tortuosity factor for the Knudsen diffusion inside monoliths of a samaria–alumina aerogel catalyst: a diffusion NMR study

Abstract

Pulsed field gradient (PFG) NMR was applied to measure tortuosity factors for carbon dioxide diffusion in the Knudsen and gas regimes inside monoliths of a samaria–alumina aerogel catalyst, a high porosity material containing micropores in addition to meso- and macropores. The apparent tortuosity factor obtained from PFG NMR measurements for the Knudsen diffusion in the meso- and macropores of the catalyst has an unexpectedly large value of approximately 6 if carbon dioxide adsorption in the micropores and other types of surface adsorption sites of the catalyst is ignored. At the same time, the corresponding apparent tortuosity factor in the gas regime was found to be around 2. Application of a proposed model which describes fast molecular exchange between the surface adsorption sites and the main pore volume of the catalyst yields corrected tortuosity factors which depend only on the pore system geometry. Using this model, the corrected tortuosity factors were found to be around 2 for both diffusion regimes, in agreement with the expectations based on a high porosity of the studied catalyst.

Graphical abstract: The origin of a large apparent tortuosity factor for the Knudsen diffusion inside monoliths of a samaria–alumina aerogel catalyst: a diffusion NMR study

Supplementary files

Article information

Article type
Paper
Submitted
04 Aug 2015
Accepted
22 Sep 2015
First published
23 Sep 2015

Phys. Chem. Chem. Phys., 2015,17, 27481-27487

Author version available

The origin of a large apparent tortuosity factor for the Knudsen diffusion inside monoliths of a samaria–alumina aerogel catalyst: a diffusion NMR study

R. Mueller, S. Zhang, M. Klink, M. Bäumer and S. Vasenkov, Phys. Chem. Chem. Phys., 2015, 17, 27481 DOI: 10.1039/C5CP04609B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements