Issue 29, 2014

Atomic layer deposition of B2O3/SiO2 thin films and their application in an efficient diffusion doping process

Abstract

We investigated atomic layer deposition (ALD) of B2O3 and SiO2 thin films using trimethylborate (TMB) and bis-(diethylamino)silane (SAM-24) precursors, focusing on growth characteristics and film properties. For both cases, ALD processes using O3 and O2 plasma as reactants exhibited well-defined growth saturation and linear growth behavior without any incubation cycles, and produced highly pure, stoichiometric films. In the case of B2O3 films, however, SiO2 layer passivation is required onto the B2O3 due to a spontaneous decomposition caused by moisture in air. On the basis of electrical characterization, the detailed dielectric properties of SiO2 and B2O3/passivation SiO2 films were extensively discussed including the k-value, flat band voltage, and leakage currents. Then, boron-doped SiO2 films with different B/(B + Si) compositions were prepared by controlling B2O3 and SiO2 growth cycles, followed by drive-in annealing and a subsequent wet removal process. Based on both theoretical estimation and SIMS depth profile results, we demonstrated that the surface doping concentration is effectively modulated with controllable B doping contents in the B-doped SiO2 films.

Graphical abstract: Atomic layer deposition of B2O3/SiO2 thin films and their application in an efficient diffusion doping process

Supplementary files

Article information

Article type
Paper
Submitted
31 Mar 2014
Accepted
12 May 2014
First published
15 May 2014

J. Mater. Chem. C, 2014,2, 5805-5811

Atomic layer deposition of B2O3/SiO2 thin films and their application in an efficient diffusion doping process

W. Kim, I. Oh, M. Kim, W. J. Maeng, C. Lee, G. Lee, C. Lansalot-Matras, W. Noh, D. Thompson, D. Chu and H. Kim, J. Mater. Chem. C, 2014, 2, 5805 DOI: 10.1039/C4TC00648H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements