Issue 21, 2014

Extremely high color rendering white light from surface passivated carbon dots and Zn-doped AgInS2 nanocrystals

Abstract

In this study, highly luminescent carbon dots with diameters of 3–5 nm were synthesized via the carbonization of citric acid, and the effects of surface passivation and carbonization temperature on the optical properties were investigated. A red-shift in the emission wavelength was observed with increasing excitation wavelength, and oleylamine-capped carbon dots showed the highest quantum yield of approximately 43% when excited at 380 nm, whereas the reaction temperature had no influence on the emission wavelength and morphology of the dots. Additionally, I–III–VI AgInS2 nanocrystals (NCs) were prepared by thermal decomposition at a low temperature, and the emission wavelength was tuned by adjusting the growth temperature or introducing Zn ions, which enhanced the quantum yield up to 50%. For carbon dot application, a white LED was fabricated by combining a 380 nm UV LED with the carbon dots and Zn-doped AgInS2 NCs. White light from this LED exhibited an excellent color rendering index of greater than 95 with a warm color temperature, and demonstrated its potential for use in solid state lighting.

Graphical abstract: Extremely high color rendering white light from surface passivated carbon dots and Zn-doped AgInS2 nanocrystals

Supplementary files

Article information

Article type
Paper
Submitted
26 Dec 2013
Accepted
16 Mar 2014
First published
18 Mar 2014

J. Mater. Chem. C, 2014,2, 4227-4232

Author version available

Extremely high color rendering white light from surface passivated carbon dots and Zn-doped AgInS2 nanocrystals

W. Chung, H. Jung, C. H. Lee and S. H. Kim, J. Mater. Chem. C, 2014, 2, 4227 DOI: 10.1039/C3TC32559H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements