Issue 107, 2014

Effect of dispersed colloidal gold nanoparticles on the electrical properties of a columnar discotic liquid crystal

Abstract

A dispersion of colloidal gold nanoparticles (GNPs) in a triphenylene-based discotic liquid crystal (DLC), namely 2,3,6,7,10,11-hexabutyloxytriphenylene (HAT4), possessing a hexatic plastic columnar phase (Colhp) phase, has been studied by differential scanning calorimetry, polarized light microscopy, UV-Vis absorption spectroscopy, X-ray diffraction and dielectric spectroscopy. GNPs have been dispersed at three different concentrations in pure HAT4 viz. 0.2, 0.6 and 1.2 wt%. It has been observed that with the increase of GNPs concentration, the Colhp–isotropic liquid transition temperature decreases substantially but the crystal–Colhp transition temperature does not changes significantly. Electrical conductivity increases by at least five orders of magnitude for the highest concentration of GNPs (1.2 wt%) as compared to the pure material i.e. HAT4. Observed results suggest that although extremely low concentrations of GNPs are not very useful, a moderate concentration is highly useful for increasing the conductivity of the Colhp phase and also to implant surface plasmon resonance. These results may be exploited to enhance the efficiency of electro-optical devices by using HAT4–GNPs composites.

Graphical abstract: Effect of dispersed colloidal gold nanoparticles on the electrical properties of a columnar discotic liquid crystal

Article information

Article type
Paper
Submitted
30 Sep 2014
Accepted
06 Nov 2014
First published
06 Nov 2014

RSC Adv., 2014,4, 62404-62412

Author version available

Effect of dispersed colloidal gold nanoparticles on the electrical properties of a columnar discotic liquid crystal

M. Mishra, S. Kumar and R. Dhar, RSC Adv., 2014, 4, 62404 DOI: 10.1039/C4RA11541D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements