Issue 16, 2013

NO2-sensing performance of SnO2 microrods by functionalization of Ag nanoparticles

Abstract

Highly sensitive and selective NO2 sensing performances were realized with the networked SnO2 microrods functionalized with Ag nanoparticles by applying γ-ray radiolysis. The Ag nanoparticles were transformed into nanoparticles of the Ag/Ag2O phase by thermal heating. The NO2 sensing characteristics of the Ag-functionalized SnO2 microrods were compared with those of bare SnO2 microrods. The cross-sensibility of the Ag-functionalized SnO2 microrods to other gases was tested for O2, SO2, CO, C6H6 and C7H8. The sensing results demonstrated not only that γ-ray radiolysis was an effective means of functionalizing the surface of oxide microrods with catalytic Ag nanoparticles, but also that the Ag functionalization greatly enhanced the SnO2 microrods' capability of detecting NO2 in light of response and selectivity. The special energy band structure built on the surface of SnO2 microrods associated with Ag nanoparticles leads to a superior response to oxidizing gases than reducing gases. Being combined with this, easy dissociation of NO2 into more active chemical species by the unique catalytic role of Ag is likely to be responsible for the selective, sensitive NO2 sensing performances of the Ag-functionalized SnO2 microrods.

Graphical abstract: NO2-sensing performance of SnO2 microrods by functionalization of Ag nanoparticles

Supplementary files

Article information

Article type
Paper
Submitted
10 Nov 2012
Accepted
20 Feb 2013
First published
21 Feb 2013

J. Mater. Chem. C, 2013,1, 2834-2841

NO2-sensing performance of SnO2 microrods by functionalization of Ag nanoparticles

S. Choi, A. Katoch, G. Sun, P. Wu and S. S. Kim, J. Mater. Chem. C, 2013, 1, 2834 DOI: 10.1039/C3TC00602F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements