Issue 31, 2013

Thermoelectric performance of the ordered In4Se3–In composite constructed by monotectic solidification

Abstract

In4Se3 has recently been found to be a layered compound which shows promising thermoelectric (TE) properties. In the present study, a textured In4Se3-based material grown by the zone melting technique is found to be a composite with elemental indium embedded in the In4Se3 matrix. The TE properties of this composite are evaluated and a maximum figure of merit ZT of 0.9 is achieved in the direction perpendicular to the growth direction. Such a result should provide a useful guidance for composition control towards further ZT enhancement in this material.

Graphical abstract: Thermoelectric performance of the ordered In4Se3–In composite constructed by monotectic solidification

Article information

Article type
Paper
Submitted
21 Dec 2012
Accepted
29 May 2013
First published
29 May 2013

J. Mater. Chem. A, 2013,1, 8844-8847

Thermoelectric performance of the ordered In4Se3–In composite constructed by monotectic solidification

Y. Zhai, Q. Zhang, J. Jiang, T. Zhang, Y. Xiao, S. Yang and G. Xu, J. Mater. Chem. A, 2013, 1, 8844 DOI: 10.1039/C3TA01599H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements