Issue 34, 2013

Inertisation of heavy metals in municipal solid waste incineration fly ash by means of colloidal silica – a synchrotron X-ray diffraction and absorption study

Abstract

Many efforts have been undertaken in past decades to minimize pollution from municipal solid waste incineration fly ash (MSWI FA). This residue is toxic, because of its high concentration of heavy metals, mainly Pb and Zn. A new method for heavy metals entrapment with MSWI FA was proposed recently. The method is based on the use of colloidal silica and it was applied to other FA typologies (flue gas desulfurization and coal fly ashes). The first results, in terms of material recovery, are very promising. The present paper is dedicated to the study of the mechanism of entrapment of heavy metals as promoted by the use of colloidal silica in the inertisation process by means of X-ray Absorption Spectroscopy (XAS) and by synchrotron-based XRD. Only XAS allowed focussing on the local environmental changes for Pb and Zn atoms on a molecular level. Chemical equilibrium calculations predict that, without silica, water-soluble Pb and Zn salts form stable phases, such as carbonates. XAS analysis showed that, despite carbonation of alkaline earth metals such as Ca, colloidal silica promotes the stabilisation of major heavy metals in phases other than carbonates and most likely in the more inert silicate form.

Graphical abstract: Inertisation of heavy metals in municipal solid waste incineration fly ash by means of colloidal silica – a synchrotron X-ray diffraction and absorption study

Article information

Article type
Paper
Submitted
15 Apr 2013
Accepted
03 Jun 2013
First published
03 Jun 2013

RSC Adv., 2013,3, 14339-14351

Inertisation of heavy metals in municipal solid waste incineration fly ash by means of colloidal silica – a synchrotron X-ray diffraction and absorption study

R. P. W. J. Struis, M. Pasquali, L. Borgese, A. Gianoncelli, M. Gelfi, P. Colombi, D. Thiaudière, L. E. Depero, G. Rizzo and E. Bontempi, RSC Adv., 2013, 3, 14339 DOI: 10.1039/C3RA41792A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements