Issue 9, 2013

An efficient oxidative desulfurization process using terbium-polyoxometalate@MIL-101(Cr)

Abstract

An efficient and recyclable oxidative desulfurization process (ODS) to remove the most refractory sulfur-compounds (dibenzothiophene, 1-benzothiophene and 4,6-dimethyldibenzothiophene) from fuel is reported. The ODS process was catalyzed by terbium-polyoxometalate [Tb(PW11O39)2]11− (Tb(PW11)2) and its composite Tb(PW11)2@MIL-101. The tetrabutylammonium (TBA) salt of Tb(PW11)2 was prepared and further incorporated in the porous metal–organic framework MIL-101(Cr). The TBA compound and its composite were characterized by various techniques (powder X-ray diffraction, FT-IR, FT-Raman, SEM and elemental analysis), and their electrochemical behavior was investigated, indicating that the structure of the polyoxometalate anion must be retained after immobilization. The studied ODS process was based on a biphasic system formed by a model oil with various refractor sulfur-compounds and an extracting solvent using H2O2 as the oxidant. Two main steps in the process were carefully investigated: the initial extraction and the oxidative catalytic stage. The optimization of the ODS process was performed by the analysis of the most suitable extracting solvent and also comparing the desulfurization performance of the homogeneous Tb(PW11)2 and the heterogeneous Tb(PW11)2@MIL-101 catalysts. Acetonitrile was selected as the best solvent because it allowed the highest desulfurization rate, conciliating good initial extraction and high catalytic performance. The presence of the porous catalyst Tb(PW11)2@MIL-101 seemed not to influence the initial extraction step; however, with this porous hybrid catalyst were obtained higher desulfurization rates during the catalytic stage. Remarkably, using Tb(PW11)2@MIL-101 and the oil–acetonitrile system complete desulfurization of oil was achieved only after 5 h. The recyclability of the solid catalyst was investigated for three consecutive ODS cycles and its stability was confirmed by several techniques.

Graphical abstract: An efficient oxidative desulfurization process using terbium-polyoxometalate@MIL-101(Cr)

Supplementary files

Article information

Article type
Paper
Submitted
25 Apr 2013
Accepted
17 Jun 2013
First published
16 Jul 2013

Catal. Sci. Technol., 2013,3, 2404-2414

An efficient oxidative desulfurization process using terbium-polyoxometalate@MIL-101(Cr)

S. Ribeiro, C. M. Granadeiro, P. Silva, F. A. Almeida Paz, F. F. de Biani, L. Cunha-Silva and S. S. Balula, Catal. Sci. Technol., 2013, 3, 2404 DOI: 10.1039/C3CY00287J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements