Issue 43, 2012

Impact of precursor size on the chain structure and mechanical properties of solvent-swollen epoxy gels

Abstract

The thermal and mechanical properties of solvent-swollen epoxy gels were investigated as a function of pre-cursor size in a model end-linked network. The epoxy networks were formed by cross-linking diepoxide and diamine precursors in the presence of a low volatility solvent, dibutylphthalate (DBP). Both precursors were end functionalized and contained a poly(propylene glycol) (PPG) spacer between the epoxy and amine functionality, respectively. The lengths of both precursors were controlled by varying the molecular weight of the PPG spacer between functional groups. The glass transition temperature for the gels as a function of solvent loading was well predicted by the Fox equation. The scaling factors of shear storage modulus versus solvent loading increased with increasing diamine precursor molecular weight to values much larger (3.91) than the theoretical value of 2.3, for entanglement dominated network formation in a theta solvent. In contrast, the scaling factor increased with decreasing epoxy precursor molecular weight to values near 4.5. The large, molecular weight dependent scaling factors are attributed to loop defect formation as the result of the amine cross-linker architecture, which consists of two difunctional reactive end groups separated by a spacer. Rather than equal spacing of all four reactive sites, the amine end groups contain two reactive hydrogens that increase the local concentration of reactive species, and facilitates loop formation. We anticipate that this work will aid in the development of non-aqueous gels and provide enhanced tailoring of the gel properties over a broad range of stiffness.

Graphical abstract: Impact of precursor size on the chain structure and mechanical properties of solvent-swollen epoxy gels

Supplementary files

Article information

Article type
Paper
Submitted
02 Apr 2012
Accepted
04 Sep 2012
First published
11 Sep 2012

Soft Matter, 2012,8, 11185-11192

Impact of precursor size on the chain structure and mechanical properties of solvent-swollen epoxy gels

R. A. Mrozek, D. B. Knorr, S. W. Spangler, P. J. Cole and J. L. Lenhart, Soft Matter, 2012, 8, 11185 DOI: 10.1039/C2SM25768H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements