Issue 5, 2012

ZnO–ZnGa2O4 core–shell nanowire array for stable photoelectrochemical water splitting

Abstract

A dense array of vertically aligned ZnO–ZnGa2O4 core–shell nanowires was synthesized on a large scale on an a-plane sapphire substrate by a simple two-step chemical vapor deposition method. The ZnO cores and ZnGa2O4 shells of the nanowires are of single crystal quality and have aligned crystallographic orientations as evidenced from XRD and TEM analyses. Mott–Schottky analysis and voltage onset from the photocurrent–voltage curve confirm an n-type semiconductor property, a flat-band potential of −0.4 V (versusNHE) and a carrier density of 7 × 1018 cm−3 for the ZnO–ZnGa2O4 core–shell nanowires. A stable and large photocurrent of 1.2 mA cm−2 was obtained with the ZnO–ZnGa2O4 core–shell nanowire array when used as a photoanode at an applied bias of +0.7 V (versusAg/AgCl) under a 300 W xenon lamp illumination. Moreover, a low dark current of <10−4 mA cm−2 was obtained at an applied bias of +0.7 V (versusAg/AgCl) without light illumination for the ZnO–ZnGa2O4 nanowire array. These results suggest that the dense array of ZnO–ZnGa2O4 core–shell nanowires provides enhanced electronic properties and stable anti-photocorrosion ability and, therefore, is promising as a photoanode in photoelectrochemical water splitting.

Graphical abstract: ZnO–ZnGa2O4 core–shell nanowire array for stable photoelectrochemical water splitting

Article information

Article type
Paper
Submitted
06 Oct 2011
Accepted
23 Nov 2011
First published
23 Dec 2011

Nanoscale, 2012,4, 1509-1514

ZnO–ZnGa2O4 core–shell nanowire array for stable photoelectrochemical water splitting

M. Zhong, Y. Li, I. Yamada and J. Delaunay, Nanoscale, 2012, 4, 1509 DOI: 10.1039/C2NR11451H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements