Issue 8, 2012

Vapor phase selective hydrogenation of acetone to methyl isobutyl ketone (MIBK) over Ni/CeO2catalysts

Abstract

Ceria supported nickel oxide catalysts with varying nickel loadings from 1.0 to 20.0 wt% were prepared by the impregnation method. The catalysts were characterized by X-ray diffraction (XRD), UV-visible diffuse reflectance spectroscopy (UV-DRS), temperature programmed reduction (TPR), temperature programmed desorption (TPD) of CO2, and surface area measurements. The dispersion of nickel and metal area were determined by the hydrogen chemisorption method. The X-ray diffraction patterns suggest the presence of crystalline NiO phase beyond 2.5 wt% of Ni on ceria. The UV-visible diffuse reflectance spectra reveal the presence of two types of nickel species on the CeO2 support. TPR patterns reveal the presence of highly dispersed surface free nickel oxide species at lower temperatures and bulk NiO at higher temperatures. The basicity of the catalysts measured by the CO2 TPD method was found to increase with an increase in nickel loading up to 2.5 wt% and decrease with further increase in nickel loading. The vapor phase condensation and selective hydrogenation of acetone to methyl isobutyl ketone (MIBK) were carried out on Ni/CeO2 catalysts and the catalytic properties are correlated with the results of CO2 TPD measurements and also with the dispersion of the nickel species supported on ceria.

Graphical abstract: Vapor phase selective hydrogenation of acetone to methyl isobutyl ketone (MIBK) over Ni/CeO2 catalysts

Article information

Article type
Paper
Submitted
14 Jan 2012
Accepted
12 Apr 2012
First published
17 Apr 2012

Catal. Sci. Technol., 2012,2, 1665-1673

Vapor phase selective hydrogenation of acetone to methyl isobutyl ketone (MIBK) over Ni/CeO2 catalysts

P. V. R. Rao, V. P. Kumar, G. S. Rao and K. V. R. Chary, Catal. Sci. Technol., 2012, 2, 1665 DOI: 10.1039/C2CY20021J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements