Issue 23, 2012

Growth characteristics of uniaxial InGaN/GaN MQW/n-GaN nanowires on Si(111) using MOCVD

Abstract

We report on the growth of the uniaxial InGaN/GaN multiple quantum well (MQW) on n-GaN nanowires (NWs) on Si(111) substrates by dynamically adjusting the growth parameters using the pulsed flow metalorganic chemical vapor deposition (MOCVD) technique. We carried out a two-step growth process to grow the uniaxial InGaN/GaN MQW/n-GaN NWs structure. In the first step, the n-GaN NWs were grown at 950 °C and in the second stage, we suitably decreased the growth temperature to 630 and 710 °C, respectively, to grow InGaN/GaN MQW NWs. The surface morphology, structural and optical characterization of the grown InGaN/GaN MQW/n-GaN NWs were studied by field-emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), photoluminescence (PL) and cathodoluminescence (CL) measurements. The CL spectrum recorded on an individual InGaN/GaN MQW/n-GaN NW is dominated by the band-edge emission at 366.7 and 413.5 nm corresponding to n-GaN and MQW structures, respectively. The resultant NWs were found to be free of strain. These results indicate that the pulsed MOCVD technique is an effective method to grow uniaxial InGaN/GaN MQW on n-GaN NWs which is advantageous to other growth techniques. These kinds of uniaxial NWs are promising to allow flat band quantum structures that are shown to improve the efficiency of light-emitting diodes.

Graphical abstract: Growth characteristics of uniaxial InGaN/GaN MQW/n-GaN nanowires on Si(111) using MOCVD

Article information

Article type
Paper
Submitted
11 Aug 2012
Accepted
14 Sep 2012
First published
14 Sep 2012

CrystEngComm, 2012,14, 8208-8214

Growth characteristics of uniaxial InGaN/GaN MQW/n-GaN nanowires on Si(111) using MOCVD

Y. Ra, R. Navamathavan and C. Lee, CrystEngComm, 2012, 14, 8208 DOI: 10.1039/C2CE26281A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements