Issue 19, 2011

In situassembly, regeneration and plasmonic immunosensing of a Aunanorod monolayer in a closed-surface flow channel

Abstract

Herein, a simple and effective approach is reported for the in situ generation and regeneration of a Au nanorod (AuNR) monolayer inside a glass/silica-based, closed-surface flow channel. The density of the AuNR monolayer in the flow channel can be easily modified by varying the concentration of the AuNR and the cetyltrimethylammonium bromide as well as the incubation time. The fabricated AuNR monolayer in the flow channels was stable under harsh conditions, such as in extreme pH, organic solvents and at a fast flow rate. In addition, the flow channel could be reused by removing the immobilized AuNRs via the injection of diluted aqua regia or potassium iodide; the AuNR monolayer can subsequently be regenerated. The AuNRs in the closed flow channel were further exploited as a label-free detection method for a clinical biomarker, neutrophil gelatinase-associated lipocalin (NGAL), based on single-nanoparticle plasmonic assay. The corresponding limit of detection for NGAL was measured to be 8.5 ng mL−1 (∼340 pM) based on a signal-to-noise ratio of 3. The estimated recovery of NGAL in human serum and urine was higher than 80%, which indicates that this technique could potentially be used for the diagnosis of acute kidney injury.

Graphical abstract: In situ assembly, regeneration and plasmonic immunosensing of a Au nanorod monolayer in a closed-surface flow channel

Supplementary files

Article information

Article type
Paper
Submitted
30 May 2011
Accepted
13 Jul 2011
First published
11 Aug 2011

Lab Chip, 2011,11, 3299-3304

In situ assembly, regeneration and plasmonic immunosensing of a Au nanorod monolayer in a closed-surface flow channel

L. Guo, Y. Huang, Y. Kikutani, Y. Tanaka, T. Kitamori and D. Kim, Lab Chip, 2011, 11, 3299 DOI: 10.1039/C1LC20468H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements