Issue 6, 2011

The separation of immiscible liquid slugs within plastic microchannels using a metallic hydrophilic sidestream

Abstract

This paper describes experiments and related modelling on a new method for separating aqueous phase slugs from the surrounding organic matrix phase in segmented two phase flow in a plastic microcapillary film (MCF). Kerosene or paraffin oil was metered through a plastic capillary of 630 microns diameter and aqueous phase slugs were generated within the capillary by the continuous sidestream injection of water. It was found that the resulting aqueous phase slugs formed in the MCF could be subsequently easily separated from the organic phase by piercing the downstream sidewall of the plastic capillary with a hydrophilic metal hypodermic needle to draw off an aqueous sidestream. Optical scrutiny of the phase separation process indicated that two distinct disengagement mechanisms are involved, in which the metal needle tip either remains submerged in the aqueous phase or becomes periodically exposed to the organic phase at certain stages of the segregation process. The separation efficiency, i.e. the degree of residual phase cross-contamination, was determined as a function of both the sidestream needle angle and the depth of needle penetration into the capillary for a given flow rate and phase ratio. It was established that the separation efficiency was very sensitive to the downstream pressure balance between the organic mainstream flow in the plastic capillary and the aqueous sidestream flow through the needle. A mathematical model for the pressure balance conditions was developed by making certain simplifying assumptions and taking the Laplace interfacial pressure into account. The model predictions agreed surprisingly well with the experimental findings, thus providing circumstantial evidence for the validity of the insights into the phase separation mechanism.

Graphical abstract: The separation of immiscible liquid slugs within plastic microchannels using a metallic hydrophilic sidestream

Article information

Article type
Paper
Submitted
24 Sep 2010
Accepted
07 Jan 2011
First published
28 Jan 2011

Lab Chip, 2011,11, 1022-1029

The separation of immiscible liquid slugs within plastic microchannels using a metallic hydrophilic sidestream

F. Scheiff, M. Mendorf, D. Agar, N. Reis and M. Mackley, Lab Chip, 2011, 11, 1022 DOI: 10.1039/C0LC00442A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements