Issue 4, 2011

Direct biofuel low-temperature solid oxidefuelcells

Abstract

A low-temperature solid oxide fuel cell system was developed to use bioethanol and glycerol as fuels directly. This system achieved a maximum power density of 215 mW cm−2 by using glycerol at 580 °C and produced a great impact on sustainable energy and the environment.

Graphical abstract: Direct biofuel low-temperature solid oxide fuel cells

Supplementary files

Article information

Article type
Communication
Submitted
08 Sep 2010
Accepted
24 Jan 2011
First published
15 Feb 2011

Energy Environ. Sci., 2011,4, 1273-1276

Direct biofuel low-temperature solid oxide fuel cells

H. Qin, Z. Zhu, Q. Liu, Y. Jing, R. Raza, S. Imran, M. Singh, G. Abbas and B. Zhu, Energy Environ. Sci., 2011, 4, 1273 DOI: 10.1039/C0EE00420K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements