Poptube approach for ultrafast carbon nanotube growth†
Abstract
Microwave irradiation can be used to heat conductive materials and
Maintenance work is planned from 09:00 BST to 12:00 BST on Saturday 28th September 2024.
During this time the performance of our website may be affected - searches may run slowly, some pages may be temporarily unavailable, and you may be unable to access content. If this happens, please try refreshing your web browser or try waiting two to three minutes before trying again.
We apologise for any inconvenience this might cause and thank you for your patience.
* Corresponding authors
a
Department of Polymer and Fiber Engineering, Auburn University, Auburn, USA
E-mail:
xzz0004@auburn.edu
Fax: +1-334-844-4068
Tel: +1-334-844-5439
b Department of Civil, Construction, and Environmental Engineering, The University of Alabama, Tuscaloosa, USA
c Department of Mechanical Engineering, Auburn University, Auburn, USA
d Department of Materials Engineering, The University of Texas at Dallas, Richardson, USA
e Nanotechnology Research Center, Georgia Institute of Technology, Atlanta, USA
Microwave irradiation can be used to heat conductive materials and
Z. Liu, J. Wang, V. Kushvaha, S. Poyraz, H. Tippur, S. Park, M. Kim, Y. Liu, J. Bar, H. Chen and X. Zhang, Chem. Commun., 2011, 47, 9912 DOI: 10.1039/C1CC13359D
To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.
If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.
If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.
Read more about how to correctly acknowledge RSC content.
Fetching data from CrossRef.
This may take some time to load.
Loading related content