Issue 19, 2011

A gold nanorod based colorimetric probe for the rapid and selective detection of Cu2+ ions

Abstract

A gold nanorod (AuNR) based colorimetric probe was reported for the rapid and selective detection of Cu2+ ions. The probe was fabricated by functionalizing cysteine (Cys) onto AuNR (Cys-AuNR) with an aspect ratio of 2.3. The strong coordination of Cu2+ with cysteine resulted in a stable Cys–Cu–Cys complex, and induced the aggregation of the colloidal nanorods along with a rapid colour change from blue-green to dark gray. Potential factors affecting the performance of the probe for the detection of Cu2+ were carefully optimized, including the pH value of the buffer media, the concentration of cysteine, and the kinetics for the coordination of Cu2+ with Cys-AuNR. Under optimal conditions, the developed colorimetric method gave a linear range of 1–100 μM for Cu2+, and a detection limit (3s) of 0.34 μM. Moreover, the developed method exhibited excellent selectivity for Cu2+, and quantitative spike-recoveries from 90% to 107% in environmental water samples. The proposed colorimetric approach can in principle be used to detect other metal ions by functionalizing various specific ligands onto the AuNR that can selectively bind the other target metal ions.

Graphical abstract: A gold nanorod based colorimetric probe for the rapid and selective detection of Cu2+ ions

Supplementary files

Article information

Article type
Paper
Submitted
04 Jun 2011
Accepted
01 Jul 2011
First published
08 Aug 2011

Analyst, 2011,136, 3904-3910

A gold nanorod based colorimetric probe for the rapid and selective detection of Cu2+ ions

J. Liu, H. Wang and X. Yan, Analyst, 2011, 136, 3904 DOI: 10.1039/C1AN15460E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements