Issue 7, 2010

Zn-doped nanocrystalline TiO2 films for CdS quantum dot sensitized solar cells

Abstract

Quantum dot-sensitized solar cells based on Zn-doped TiO2 (Zn-TiO2) film photoanode and polysulfide electrolyte were fabricated. Zn-TiO2 nanoparticles were obtained via a hydrothermal method and screen printed on the fluorine-doped tin oxide glass to prepare the photoanode. The structure, morphology and impedance of the Zn-TiO2/CdS film and the photovoltaic performance of the Zn-TiO2/CdS cell were investigated. It was found that the photovoltaic efficiency was improved by 24% when the Zn-TiO2 film was adopted as the photoanode of CdS QDSSCs instead of only the TiO2 layer. The improvement was ascribed to the reduction of electron recombination and the enhancement of electron transport in the TiO2 film by Zn doping.

Graphical abstract: Zn-doped nanocrystalline TiO2 films for CdS quantum dot sensitized solar cells

Article information

Article type
Paper
Submitted
05 Feb 2010
Accepted
18 Mar 2010
First published
20 May 2010

Nanoscale, 2010,2, 1229-1232

Zn-doped nanocrystalline TiO2 films for CdS quantum dot sensitized solar cells

G. Zhu, Z. Cheng, T. Lv, L. Pan, Q. Zhao and Z. Sun, Nanoscale, 2010, 2, 1229 DOI: 10.1039/C0NR00087F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements