Issue 6, 2007

Photocatalytic reduction of carbon dioxide using sol–gel derived titania-supported CoPc catalysts

Abstract

CoPc loaded titania was synthesized by an improved sol–gel method using a homogeneous hydrolysis technique. The grain size of TiO2 and CoPcTiO2 was uniform and average diameters were less than 20 nm. Both catalysts had two crystal phases, of which rutile accounted for about 28%. When they were used for the photoreduction of CO2 in NaOH solution under ambient conditions, the formate yield was significantly higher than that of the others, such as formaldehyde, methanol and so on. In order to increase the activity of the photocatalysts some factors were optimized, including the quantity of CoPcTiO2 catalyst, concentration of Na2SO3 hole scavenger, concentration of the NaOH solution and irradiation time. Under the optimal conditions, the gross photocatalytic reduction of CO2 was 1032 µmol (g cat)–1. Furthermore, the yield of CH4 did not increase in the presence of CH3OH or HCHO, showing that the generation of CH4 from CO2 did not proceed viamethanol as an intermediate under these conditions.

Graphical abstract: Photocatalytic reduction of carbon dioxide using sol–gel derived titania-supported CoPc catalysts

Article information

Article type
Paper
Submitted
11 Sep 2006
Accepted
02 Mar 2007
First published
04 Apr 2007

Photochem. Photobiol. Sci., 2007,6, 695-700

Photocatalytic reduction of carbon dioxide using sol–gel derived titania-supported CoPc catalysts

S. Liu, Z. Zhao and Z. Wang, Photochem. Photobiol. Sci., 2007, 6, 695 DOI: 10.1039/B613098D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements