Issue 9, 2007

Temperature effect of ammonium halogenides as mineralizers on the phase stability of gallium nitride synthesized under acidic ammonothermal conditions

Abstract

The temperature effect of the ammonium halogenide mineralizers NH4X (X = Cl, Br, I) on the phase stability of GaN synthesized under supercritical ammonothermal conditions in the temperature range 360–550 °C has been investigated. Hexagonal GaN (h-GaN) and cubic GaN (c-GaN) were crystallized. Oxygen impurities force the formation of gallium oxide at low temperatures. The tendency to form c-GaN increases from X = Cl to Br to I. Decreasing temperature supports this trend. Single-phase h-GaN can be grown from X = Cl at ≥470 °C, Br at ≥500 °C and I at ≥550 °C. Mixed mineralizers of type X = Cl + Br and Cl + I are useful to improve both the yield and the temperature stability range for h-GaN. The size of h-GaN crystals decreases from X = Cl to Br to I. The use of a h-GaN substrate has a phase-stabilizing effect and lowers the temperature stability range for overgrown h-GaN films. The choice of precursor will have an impact on the a and c lattice parameters of self-nucleated h-GaN.

Graphical abstract: Temperature effect of ammonium halogenides as mineralizers on the phase stability of gallium nitride synthesized under acidic ammonothermal conditions

Article information

Article type
Paper
Submitted
05 Sep 2006
Accepted
02 Nov 2006
First published
15 Nov 2006

J. Mater. Chem., 2007,17, 886-893

Temperature effect of ammonium halogenides as mineralizers on the phase stability of gallium nitride synthesized under acidic ammonothermal conditions

D. Ehrentraut, N. Hoshino, Y. Kagamitani, A. Yoshikawa, T. Fukuda, H. Itoh and S. Kawabata, J. Mater. Chem., 2007, 17, 886 DOI: 10.1039/B612816E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements