Investigation of 15-year-old municipal solid waste deposit profiles by means of FTIR spectroscopy and thermal analysis

Abstract

Five profiles of a 15-year-old bank containing over three weeks composted municipal solid waste were characterized by means of different parameters habitually applied in waste management (loss on ignition, total organic carbon, total nitrogen, NH₄–N, pH), and in addition by humic acid determination, FTIR spectroscopy and thermal analysis. Stabilization processes are revealed by humic acid contents. Over the 15 year period organic matter had developed in various ways. Highest humic acid contents were found at 0.5 m below the surface. Below 1.0–1.5 m anaerobic conditions dominated causing a strong decline of humic acid concentrations. Despite similar contents of organic matter at 0.5 m and at 3.0 m organic matter quality differed. These differences were verified by infrared spectroscopic investigations and thermal analyses (differential scanning calorimetry DSC). The spectral pattern of 15-year-old profile samples (municipal solid waste including the biogenic fraction) was compared to current municipal solid waste and abandoned landfill materials. Current municipal solid waste samples comprised different degradation stages from fresh materials to stabilized waste, suitable for landfilling according to Austrian standards. Municipal solid waste originating from abandoned landfills closed in the seventies represented stable material. Principal component analysis was performed to detect similarities and differences. It is evident that the profile samples constitute a particular group in between municipal solid waste and abandoned landfill material. Some differences can be attributed to the divergent composition of municipal solid waste in the eighties when the organic fraction was not separated. Otherwise, landfill materials from the seventies with the same composition regarding the organic fraction were deposited together with construction waste. Heat flow curves (DSC profiles) of municipal solid waste, representing different decomposition stages, illustrate the development of enthalpies and reveal the status of the profile samples. It is evident that mechanical–biological pretreatment leads to a faster stabilization of waste organic matter.