Issue 22, 2006

Fast grain boundary diffusion and surface exchange reactions at active surface sites of polycrystalline materials

Abstract

Analytical solutions to the diffusion equations for fast grain boundary diffusion and surface exchange reactions at active surface sites are derived. The microstructure of the polycrystalline sample of finite thickness is modelled by parallel grain boundaries. The ratio between the surface exchange coefficient and the diffusion coefficient for the grain boundaries is assumed to be greater than or equal to that for the bulk. The analytical solutions allow the calculation of diffusion profiles for thin films. Special emphasis is laid on a detailed analysis of the time dependence of the total amount of diffusant exchanged between the constant diffusion source (e.g. gas phase) and the polycrystalline sample (e.g. oxide ceramics) which corresponds to relaxation curves obtained from, e.g., oxygen exchange measurements. The calculated relaxation curves refer to Harrison’s type-A kinetics where homogeneous medium solutions are satisfactorily applicable, introducing effective kinetic parameters. Apart from expressions for the effective diffusion coefficient analogous relations for the effective surface exchange coefficient are proposed, depending on the microstructure of the polycrystalline material and the corresponding kinetic parameters of bulk and grain boundary regions, respectively.

Graphical abstract: Fast grain boundary diffusion and surface exchange reactions at active surface sites of polycrystalline materials

Article information

Article type
Paper
Submitted
04 Jan 2006
Accepted
03 Apr 2006
First published
04 May 2006

Phys. Chem. Chem. Phys., 2006,8, 2629-2634

Fast grain boundary diffusion and surface exchange reactions at active surface sites of polycrystalline materials

W. Preis, Phys. Chem. Chem. Phys., 2006, 8, 2629 DOI: 10.1039/B600033A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements