Issue 3, 2004

Microscopic X-ray fluorescence analysis of human dental calculus using synchrotron radiation

Abstract

In this work, new results of one- and two-dimensional spatial distributions of major, minor and trace elements of human dental calculus are presented. X-ray fluorescence induced by a synchrotron radiation source was used. The measurements were carried out in the X-ray microprobe station mounted at the X-ray fluorescence beamline of the Brazilian National Synchrotron Light Laboratory (LNLS). Two-dimensional distributions show that calcium, the major element in this type of sample, has a uniform pattern over the mapped area, while trace elements are non-homogeneously distributed. By means of different linear scans along the growing axis of the dental calculus, a markedly spatial correlation between Cu and Zn was found. A semi-quantitative analysis for Cu and Zn was performed by means of calibration curves using appropriate fabricated standards. The concentration values found for these metals were higher than those obtained in conventional bulk analysis. It was observed that these metals accumulated preferentially in the subgingival part of the calculus, near the tooth surface. These results indicate that the mineralization processes, which take place for both type of calculus, are essentially different.

Article information

Article type
Paper
Submitted
20 Nov 2002
Accepted
03 Nov 2003
First published
06 Feb 2004

J. Anal. At. Spectrom., 2004,19, 392-397

Microscopic X-ray fluorescence analysis of human dental calculus using synchrotron radiation

C. A. Pérez, H. J. Sánchez, R. A. Barrea, M. Grenón and J. Abraham, J. Anal. At. Spectrom., 2004, 19, 392 DOI: 10.1039/B211253A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements