Issue 2, 2002

Electrokinetic control of a chemical reaction in a lab-on-a-chip micro-reactor: measurement and quantitative modelling

Abstract

We have investigated the complex formation/dissociation reaction between Ni2+ ions and the ligand pyridine-2-azo-p-dimethylaniline (PADA) in a glass micro-reactor operating under electrokinetic control. An in situ, microscope-imaging technique was used to determine the spatial and temporal evolution of the reaction within the channel network of the micro-reactor. Using appropriately controlled voltage sequences, a ‘slug’ of PADA was injected into a stream of Ni2+ solution. Under the experimental reaction conditions used, Ni2+ ions are mixed with the PADA as a consequence of the species’ different electrokinetic mobilities allowing the complex formation to occur at the trailing edge of the PADA slug. Following complex formation, reversal of the flow results in the partial re-formation of free PADA by dissociation of the complex, demonstrating that voltage control can be used to drive the reaction either forwards or backwards. We discuss the methods whereby all the parameters required to predict the spatial and temporal evolution of the reaction in the micro-reactor can be either measured or estimated. Based on the estimated parameters, model calculations of the concentration profiles as a function of time show good agreement with the measured data.

Supplementary files

Article information

Article type
Paper
Submitted
14 Feb 2002
Accepted
15 Apr 2002
First published
30 Apr 2002

Lab Chip, 2002,2, 102-112

Electrokinetic control of a chemical reaction in a lab-on-a-chip micro-reactor: measurement and quantitative modelling

P. D. I. Fletcher, S. J. Haswell and X. Zhang, Lab Chip, 2002, 2, 102 DOI: 10.1039/B201685K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements