Issue 12, 2001

Abstract

Fast-ion conduction has been observed in the iodide and bromide salts of 1-methyl-3-ethylimidazolium at ambient temperatures. The melting point of these two compounds is above 350 K and even at 273 K the ionic conductivity in the solid-state is greater than 10−3S cm−1. Cation diffusion coefficients have been measured using fringe field gradient and/or pulse field gradient 1H NMR techniques, which indicated cation diffusion coefficients of the order of 10−10 m2 s−1 in the solid-state. Remarkably, these values are up to an order of magnitude higher than the cation diffusion coefficient in the supercooled liquid at 293 K. The activation energy for diffusion in the solid-state is extremely small, as is typical of solid-state fast-ion conductors and indicates a change in transport mechanism from the melt to the crystal. The inability to detect an 127I signal together with the modelling of the conductivity using the Nernst–Einstein equation suggests that the solid-state conduction is primarily due to cation diffusion. The solid-state fast-ion conduction is most likely related to vacancy diffusion along the cation layers in the crystal. The temperature dependence of the NMR signal intensity indicates that the number of mobile species is increasing with increasing temperature with an activation energy of approximately 20–30 kJ mol−1.

Graphical abstract: Room temperature fast-ion conduction in imidazolium halide salts

Article information

Article type
Paper
Submitted
26 Jun 2001
Accepted
03 Oct 2001
First published
07 Nov 2001

J. Mater. Chem., 2001,11, 3031-3036

Room temperature fast-ion conduction in imidazolium halide salts

H. A. Every, A. G. Bishop, D. R. MacFarlane, G. Orädd and M. Forsyth, J. Mater. Chem., 2001, 11, 3031 DOI: 10.1039/B105552F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements