Issue 12, 2000

Abstract

Preparation of SnNx films has been studied by atmospheric pressure chemical vapor deposition using SnCl2 and NH3 as starting materials. The films were deposited onto a quartz substrate at 550–675 °C with growth rates of 0.1–2.5 µm h−1. They showed a typical X-ray diffraction pattern for SnNx with a hexagonal structure. The band-gap was estimated to be 2.05 eV from the transmission spectra. The electron probe X-ray microanalysis showed that the N/Sn ratio of the as-deposited films was 0.73–1.10, which was dependent upon the growth temperature. They were conductive with resistivities of 0.3–10 Ω cm. The electrochromism was observed when ±1.0 V (SCE) potentials were applied to the SnNx films in a 1.0 M Na2SO4 electrolyte solution.

Article information

Article type
Paper
Submitted
23 Jun 2000
Accepted
11 Aug 2000
First published
06 Nov 2000

J. Mater. Chem., 2000,10, 2835-2837

Atmospheric pressure chemical vapor deposition of tin nitride thin films using a halide source

N. Takahashi, K. Terada and T. Nakamura, J. Mater. Chem., 2000, 10, 2835 DOI: 10.1039/B005032F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements